|
|
PEAVEY DEBUTS ARCHITECTURAL ACOUSTICS® PHR™ SERIES CEILING LOUDSPEAKERS
June 18, 2008, LAS VEGAS (InfoComm 2008 exhibit # C3727)—Architectural Acoustics by Peavey proudly introduces the new PHR™ Series loudspeakers, designed specifically for compact, in-ceiling operation in permanent installations.
The Architectural Acoustics PHR Series ceiling-mount enclosures are ideal for high-intelligibility voice, program music and versatile signal reproduction in commercial, industrial and institutional applications. A tap selector switch allows for easy system tuning and configuration for 70-volt or 100-volt distributed systems, and a full selection of taps up to 60 watts (model dependent) and an 8-ohm transformer bypass setting are included for maximum system versatility.
The UL-compliant enclosure is constructed of high-impact, injection-molded plastic and includes a press-fitted grille design that blends well with contemporary architecture. PHR Series enclosures are housed in steel backing cans and include two color-coded, screw-locked flying leads in a wiring chamber to allow for easy system wiring and daisy-chain wiring to additional PHR enclosures. A C-shaped backing plate support and tile bridge brackets are included.
Contractors are encouraged to contact their Architectural Acoustics representative for more information. Features and specifications are subject to change without notice.
PHR™ 860
8” woofer with a 1.2” voice coil, polypropylene cone and rubber
surround
¾” soft-dome tweeter
Power handling: 90W (thru mode); transformer taps 60W, 30W, 15W, 7.5
W, 3.75W (70V), 100V capable
Frequency response: 80 Hz to 20 kHz, +/- 4 dB
Crossover frequency: 4 kHz
91 dB SPL (8 ohms nominal mode)
UL compliant
Outermost diameter: 12.44”
Overall depth: 11.3”
Cutout diameter: 11”
12.5 lbs.
Made in the U.S.A.
PHR™ 860S Sub
8” woofer with a 1.2” voice coil, polypropylene cone and rubber
surround
Power handling: 100W (thru mode); transformer taps 60W, 30W, 15W, 7.5
W, 3.75W (70V), 100V capable
Frequency response: 55 Hz to 100 Hz, +/- 6 dB
Crossover frequency: 120 Hz
89 dB SPL (8 ohms nominal mode)
UL compliant
Outermost diameter: 15.75”
Overall depth: 12.75”
Cutout diameter: 14”
14.5 lbs.
Made in the U.S.A.
PHR™ 630
6.5” woofer with a 1” voice coil, polypropylene cone and rubber
surround
¾” soft-dome tweeter
Power handling: 50W (thru mode); transformer taps 30W, 15W, 7.5W,
3.75W, 1.9W (70V), 100V capable
Frequency response: 90 Hz to 20 kHz, +/- 4 dB
Crossover frequency: 4 kHz
89 dB SPL (8 ohms nominal mode)
UL compliant
Outermost diameter: 10.2”
Overall depth: 8.6”
Cutout diameter: 8.8”
7.6 lbs.
Made in the U.S.A.
PHR™ 410
4” woofer with a 1” voice coil, polypropylene cone and rubber
surround
1” duo-dome polymer tweeter with phase plate
Power handling: 40W (thru mode); transformer taps 10W, 5W, 2.5W, 1.25
W, 0.63W (70V), 100V capable
Frequency response: 115 Hz to 13.5 kHz, +/- 4 dB
Crossover frequency: 4 kHz
86 dB SPL (8 ohms nominal mode)
UL compliant
Outermost diameter: 7.9”
Overall depth: 7.87”
Cutout diameter: 6.57”
4.6 lbs.
Made in the U.S.A.
To find out more about Architectural Acoustics, visit aa.peavey.com
|
|
