|
|
8060 A Bryan Dairy Road, Largo, FL 33777
Phone 727-545-0741 Mobile 727-424-6847 Fax 727-544-2241
Contact: Tom Morris
E-mail tom.morris@oceanoptics.com
www.seachangeronline.com
PRODUCT SHOWCASED at TFWM: The SeaChanger Color Engine
ABOUT THE globalSAN X-4: The SeaChanger Color Engine is a dynamic CYMG color changer for ETC Source Four Ellipsoidals. The SeaChanger uses patented Ocean Optics dichroic filter technology to create a nearly endless palette of stable, reproducible colors that do not shift or fade with time or temperature.
Patented “Extreme Green” RGB Filter
The SeaChanger employs four patterned dichroic filters -- cyan, yellow, magenta and a patented xG “Extreme Green” trichromic RGB filter. The xG filter extends the CYM color gamut, enabling you to create deep blues, rich reds and vibrant greens. The xG filter also adds “natural” overtones and nuance to the standard CYM palette, creating a new dimension in realistic scenery lighting. Though the xG filter wheel is standard, a variable neutral density dimmer wheel is available in its place.
Dichroic Filters Resist Heat & Humidity
Our patented coatings method allows us to create micron-scale precision patterning of dichroic coatings on a single color wheel, with resolution, transmission efficiency and durability that's far superior to dye-colored gels and other technologies. Our filters are so hardened they are essentially ceramic in nature, making the filters resistant to heat and humidity and eliminating the need for noisy cooling fans.
Shhh . . . Can You Hear That?
The SeaChanger operates silently. That’s because its dichroic filters are so robust that noisy cooling fans -- so distracting with gel scrollers -- aren’t necessary.
Simple Installation, Maintenance-Free
The SeaChanger fits between the lamp and the lens module of the Source Four. With its convenient bayonet mount, the installation is quick and efficient. Simply transfer the Source Four’s yoke onto the SeaChanger for suspension. (An optional extended 16.5" yoke for down lighting is available.) With the SeaChanger, there are no burned, broken or jammed gel strings to replace and periodic cleaning is as easy as removing a few setscrews.
Compatibility
The SeaChanger is compatible with all beam-shaping ETC Source Four accessories including (clockwise, top left) gobos, gobo rotators, gobo changers and all field-of-view barrels.
DMX512, RDM & Manual Control
The SeaChanger is a self-contained unit with an internal power supply. You can operate the SeaChanger from a 4-channel DMX512 controller, from an RDM device, and from the SeaChanger’s front-panel membrane keypad with 3-digit LED display.
Specifications
• Ambient temperature: 113 °F (45 °C) maximum
• Size/weight: 7.0" x 11.5", 12 lb.
• Power input:: 110-250 VAC, 50/60 Hz, (auto-sensing), non-dimmed circuit
• Power supply: Onboard, internal 5 V, 50 W switching mode PS
• Control: 8-bit DMX512 controller via 5-pin male and female XLR;
• RDM device per ANSI E1.20-2006
• Front panel membrane keypad with LED numeric display
• Channels: DMX start address set via RDM or onboard display:
• Channel 1 – Cyan, 0-95% saturation
• Channel 2 – Magenta, 0-95% saturation
• Channel 3 – Yellow, 0-95% saturation
• Channel 4 – Standard xG (RGB) filter, 0-99% saturation
• Channel 4 – Optional patterned Al douser, 0-99% dimming
• Channel 4 – Optional custom dichroic filter
• Color mapping: Nearly infinite color mapping within a gamut of the CIE
• triangulated color space; gamut extended by xG (RGB) filter
• Speed: <1 second average from clear to full saturation
• Beam characteristics: Preserves all ETC Source Four beam characteristics
• Accessory compatibility: All beam-shaping ETC Source Four accessories such as
• Enhanced Definition Lens Tubes (EDLT), Source Four Zooms,
• gobos, gobo rotators, gobo changers, field-of-view barrels
• (10°, 14°, 26°, 36°, 50°, 70° and 90°), and other devices
• Lamp compatibility: 575 W or 750 W HPL lamps; can be used with
• Source Four HID fixtures
• White light output: 9,500 lumens total system output (SeaChanger + 26° Source
• Four with 750 W HPL lamp)
• Color filters: Dichroic patterned CYM and xG (RGB) coatings on optical
• glass substrates, BBAR coated, in-band transmission >98%
• Mounting: Suspension on Source Four yoke from mounting points;
• Bayonet mount to fixture;
• Adaptable to Source Four tungsten or HID fixtures
• Maintenance: Easy color engine removal for cleaning; safety cable ring;
• 3’ safety cable included
OceanOptics proudly sponsors PLASA.
“SeaChanger, a silent dichroic color changer has been creating a more engaging experience to worshipers in the United States. By participating in the Technologies for Worship Conferences at PLASA, we hope to bring this experience to the European House of Worship Market.”
--Beth Weinstein, Corporate Event & Tradeshow Manager,Ocean Optics
|
|
