May 12, 2008

TFWM Website at a Glance

Contact Information

3891 Holborn Rd.
Queensville, ON L0G 1R0
Canada
p: 905-473-9822
f: 905-473-9928

Picture

4210 Hester Drive
Amarillo, TX 79124
Phone: 806.374.9402
Toll-Free: 800.729.9402
Fax: 806.374.9450
Website: www.perdueacoustics.com
email: info@perdueacoustics.com


Picture

Perdue Acoustics wall and ceiling acoustical panels with patented Mineral Wool Cores are the highest rated in the industry that can take the heat and provide the highest sound absorption levels and greatly increase speech intelligibility. We have over 17 years experience building and installing acoustical products for worship centers, auditoriums, cafeterias, gyms and convention/expo centers. From home theaters to stadium venues, our custom manufactured absorption and diffusion products are the #1 choice for your acoustical needs in this increasingly demanding market place of professional audio excellence. Perdue Acoustics team of professionals can work with you in many different ways to create a special treatment for your facility. Pictured above are some of our installed products such as custom cut shapes, suspended ceiling clouds, specialty diffusers, product combinations and full wall coverage. Call our company today at 800-729-9402 or contact us online.


OUR MOST POPULAR PRODUCTS

Picture

180° Diffsorber
LSS-180DP
The Perdue Acoustics 180° Diffsorber is the most sound absorbing product available anywhere. This panel’s proven overall and low-end diffusive and absorptive characteristics make it the best choice for treating sanctuaries, performing arts centers, and many other types of facilities. Available in absorbers, diffusers, and reflectors.




Picture

Wedge™
LSS-WFP

The Wedge™ panel series is a top performer in the mid to high frequency range. Its unique patented shape was designed to add diffusion to absorption. This panel’s proven diffusive characteristics make it the natural choice for treating small to medium size rooms such as studios, home theaters and houses of worship.



Picture

Mega Wedge™
LSS-MWFP

The Mega-Wedge™ panel takes the top performing characteristics of our Wedge™ panel and then adds thickness and mass to provide extra low frequency absorption. This product is best suited for facilities where space is limited but low frequency absorption is required.





Picture

1 to 4 inch Flat Panel
LSS-OFP

Perdue Acoustics patented flat panel series is the industry’s leader in the area of sound absorption coefficients, boasting unequalled NRC’s. All flat panels can be customized with different edge details. Choices include standard square edge or PVC hardened edge with radius, beveled, or square shapes.





Picture

1 to 4 inch Hanging Ceiling Baffle
LSS-WFB

Utilizing the same cores as in our “best in the business” flat panels, our hanging sound baffles provide excellent absorption in the upper ceiling areas of your facility. With twice the surface absorption area, you will achieve unprecedented performance with these baffles.






PANEL CONSTRUCTION and FINISHES

Picture

Perdue Acoustics’ Diffsorbers, panels, and baffles start with our patented mineral wool core. The front and back are then covered with a random strand fiberglass mat and fabric wrapped. All product cores have a melting point of 1850° F (ASTM E-136), flame spread of 0, smoke developed rating of 0, tensile strength minimum of 2631 lbs./sq.ft. breaking load, compressive resistance of 480 lbs./sq. ft. at 10% compression, and horizontal sag of not more than 1/2" in 4 ft. Panels can be fabricated with our regular edge finish or PVC trimmed edge treatment in a square, radius, or beveled edge. Our baffles are fully fabric wrapped and finished with a flap and grommets at the top edge for hanging.

Picture

FINISHES - We offer a large assortment of fabrics with many colors and patterns from quality industry textile manufacturers. Web Core micro-perforated vinyl selections are also available to match your facility decor. More info.





NEW Product - Drum Booth

Picture Perdue Acoustics’ new Isolating Drum Booth Kit LSS-DBK is an excellent way to isolate drum kits in order to keep stage volumes at a manageable level. The Iso Drum Booth also helps to achieve better house sound by not allowing bleed-over on the drum mics, and by dramatically decreasing stage volume that would normally compete with the house mix. The Drum Booth consists of 8 - 2’x2’x4” thick acoustical panels fully wrapped as a base with 8 - 2’x4’ cast acrylic clear panels connected together with a non-slip hinge at each side. We then add a 2” thick fully fabric covered panel lid and back wall, to create undoubtedly the best drum booth on the market today. The standard booth is 8’ wide x 6’ deep and may be customized to meet your specific needs. For more information, click here.


Perdue Acoustics NRC’s are unequalled. View an online chart to see which product might be best suited for your application. All flame spread - 10! Smoke rating - 95!

Production, Consultation, Sales and Installation since 1989!

Here are a couple of our many satisfied clients that we have done installations for.

"We just want to say thank you for doing such an excellent job in our church gym and fellowship hall."
-Pembroke Baptist Church, Pembroke, KY


"We at Samanco would like to thank you and all of your staff for making our project at the Jordon Vally Expo Center such a success."
-Samanco Construction, Springfield, MO


Perdue Acoustics proudly sponsors The Technologies for Worship Pavilion and Conferences at LDI, NAB and INFOCOMM

May 08, 2008
Architectural Acoustics by Peavey proudly introduces the new PHR Series loudspeakers, designed specifically for compact, in-ceiling operation in permanent installations.
May 08, 2008
Crest Audio is boosting the power of its successful CC™ Series amplifiers with the new flagship CC 5200.
May 08, 2008
Sennheiser Electronic Corporation announces the addition of Aaron Berg to its professional products sales team.
May 07, 2008
Community Professional Loudspeakers has appointed Chris Foreman to the position of Vice President, Chief Operating Officer.
May 07, 2008
TOA Electronics, Inc. is pleased to announce the appointment and promotion of Allan R. Lamberti to the newly created position of Vice President & General Manager.
May 07, 2008
Ross Video announces the appointment of Marcel Fontaine, as Regional Sales Manager for the Southwest USA.
May 07, 2008
Avlex Corporation, the name audio professionals turn to for the finest wireless technology, microphones, and portable PA systems, is pleased to introduce the new Superlux D108A Dynamic Vocal Microphone.
May 07, 2008
Carvin, the name musicians everywhere look to for high quality guitars, basses, instrument amplifiers, recording equipment, and sound reinforcement (SR) products, proudly introduces the LSX Series loudspeaker systems.
May 07, 2008
Digidesign today unveiled the Transfuser™ Preview, a free three-month prerelease version of Transfuser, a new upcoming RTAS® virtual instrument plug-in for Pro Tools® software.
May 05, 2008
The CHAUVET DMX D-Fi 2.0 upgrades the wireless DMX technology that has been in use for just over a year.